Samson SM10 Line Mixer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
Ideal for stage, studio and an infinite variety of installation applications, Samson’s SM10 Line Mixer is a versatile and reliable addition to your audio setup. This internally powered, 19-inch rackmount metal chassis unit can be easily integrated into any existing system to more efficiently group your signals.
The SM10 features ten channels with 1/4-inch stereo line inputs and a balance control for each channel. Two channels include XLR mic inputs. This allows you to blend the relative levels of stereo inputs to your liking. In addition, each channel includes a switch for +4 dBu or -10 dBV line level input.
Product Features
- Ten channels (eight 1/4-inch stereo line inputs, two combination XLR-1/4-inch inputs)
- Balance control for each channel
- Switchable +4 dBu or -10 dBV line input level
- Balanced main stereo XLR and 1/4-inch line outputs
- Versatile signal routing
- Low noise, discrete microphone pre-amplifiers with 48-volt phantom power
- Two auxiliary sends
- Front-panel headphone and monitor outputs with level controls
- Flexible 6-segment LED meter/headphone source control
- Center detents for all controls for use in low light situations
- Single 19-inch rackmount metal chassis with internal power supply
Specifications
Product Specification
| INPUTS | ||
| Microphone | XLR balanced (2) | |
| Line | 1/4” TRS balanced (Ch 1-8), 1/4” stereo (Ch 9-10) | |
| INPUT IMPEDANCE | ||
| Mic | 1.5K Ohms | |
| Line | 23K Ohms (+4 dBu, Ch 1-8); 40K Ohms (-10 dBV, Ch 1-8); 20K Ohms (Ch 9-10) | |
| MAXIMUM GAIN | ||
| Mic | 65 dB | |
| Line | 39 dB | |
| Line Operating Level | +4 dBu / -10 dBV selectable | |
| MAXIMUM INPUT LEVEL (1 kHz, ±3 dB) | ||
| Mic Input | -4 dBu | |
| Line Input | +28 dBu | |
| Equivalent Input Noise | - 123 dBu unweighted | |
| MAIN OUTPUTS | ||
| Type | 1/4” TRS balanced (2), XLR (2) | |
| Output Impedance | 200 Ohms Main Out | |
| Gain Range | -∞ to +15 dB | |
| Max output level | +22 dBu | |
| MON (Pre Fade Out) | 1/4” impedance balanced mono output (front panel), Stereo MON (rear panel) | |
| EFX (Post Fade Out) | 1/4” unbalanced | |
| Output Impedance | 100 Ohms | |
| Headphone | 1/4” TRS Stereo | |
| Output (600 Ohm load) | 100 mW | |
| SYSTEM | ||
| Frequency Response | 10 Hz – 23 kHz ±1 dB | |
| Signal-to-noise ratio | > 90 dB typical | |
| THD | <0.01% typical | |
| Crosstalk (1 kHz) | -70 dB between input channels; -70 dB between input/output channels | |
| Phantom Power | 48 Volts DC | |
| Power Requirements | 120-240 VAC / 50-60 Hz | |
See any errors on this page? Let us know.
