Audio-Technica AT4041 Condenser Microphone
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity.
Product Features
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable hi-pass filter and rugged turned-brass microphone housing
- Custom shock mount provides superior isolation
Specifications
Product Specification
| GENERAL | ||
| Element | Fixed-charge back plate, permanently polarized condenser | |
| Polar Pattern | Cardioid | |
| Frequency Response | 20-20,000 Hz | |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave | |
| Open Circuit Sensitivity | -36 dB (15.8 mV), re 1V at 1 Pa | |
| Impedance | 100 ohms | |
| Maximum Input Sound Level | 145 dB SPL, 1 kHz at 1% T.H.D. | |
| Dynamic Range | 121 dB, 1 kHz at Max SPL | |
| Signal to Noise Ratio | 70 dB, 1 kHz at 1 Pa | |
| Phantom Power Requirements | 48V DC, 3.2 mA typical | |
| Switch | Flat, roll-off | |
| Output Connector | Integral 3-pin XLRM-type | |
| Accessories | AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case | |
See any errors on this page? Let us know.
