Audio-Technica AT2050 Microphone With Multi-Pattern
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The AT2050 is a Multi-Pattern condenser Microphone suited for project recording, home studios and live performances. The features of this side-address microphone are switchable cardioid, omnidirectional and figure-of-eight polar pattern settings for all-around operation and control in any setting. The AT2050 comes fitted with an 80Hz high-pass filter switch to eliminate low frequency noise plus a 10dB Pad for more headroom.
Product Features
- Omni, cardioid, figure-of-eight switchable patterns
- 80 Hz high-pass switchable filter and 10 dB pad
- Smooth and natural sound with low noise
- Electronics compliance with A-T’s stringent consistency
Specifications
Product Specification
| ELEMENT | ||
| (DC bias) Condenser | Externally-Polarized | |
| POLAR | ||
| Patterns | Cardioid, Omnidirectional, Figure-of-Eight | |
| FREQUENCY | ||
| Response | 20-20,000 Hz | |
| Low roll off | 80 Hz, 12 dB/octave | |
| OPEN CIRCUIT | ||
| Sensitivity | –42 dB (7.9 mV) re 1V at 1 Pa | |
| MAXIMUM INPUT | ||
| Sound level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) | |
| Impedance | 120 ohms | |
| Noise | 17 dB SPL | |
| DYNAMIC RANGE | ||
| Max SPL (typical) | 132 dB, 1 kHz | |
| Signal-to-noise ratio | 77 dB, 1 kHz at 1 Pa | |
| PHANTOM POWER | ||
| Requirements | 11-52V DC, 4.7 mA typical | |
| SWITCHES | ||
| Type | Polar selection; Flat, roll-off; 10 dB pad (nominal) | |
| OUTPUT CONNECTORS | ||
| Integral | 3-pin XLRM-type | |
See any errors on this page? Let us know.
