Audio-Technica ATW-2110 Wireless UHF Body-Pack System
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
It’s a UniPack system that includes the ATW-R2100 receiver and ATW-T210 transmitter. On all 2000 series the wireless receivers at the touch of a button find and set the best available channel. The other particularity the 2000 series offers is that any of the 10 channels it has may be used together, thus eliminating problems on the frequency coordination. Other features are; True Diversity operation that gets the best signal from the two receiver sections so as to minimize dropouts, a tone squelch system for interferences called Tone Lock, a strong built half-rack receiver with LCD display showing RF and AF metering and soft-touch controls and balanced XLR and unbalanced ¼” jack output, to be used with other audio equipment.
Product Features
- Frequency scanned automatically
- All 10 channels are compatible and user-switchable
- True Diversity operation for selecting the best signal from either of the two receiver sections
- Tone Lock tone squelch system
- Half-rack tough metal receiver fits soft-touch controls and LCD display with RF and AF metering
- Balanced XLR and unbalanced 1/4" output jacks
- Ground-lift Switch
Specifications
Product Specification
| OVERALL SYSTEM | ||
| Operating Frequency | 656.125 to 678.500 MHz | |
| Number of Channels | 10 total | |
| Frequency Stability | +/-0.005%, Phase Lock Loop frequency control | |
| Modulation Mode | FM | |
| Normal Deviation | +/-5 kHz | |
| Operating Range | 300' typical | |
| Operating Temperature Range | 41° F (5° C) to 113° F (45° C) | |
| Frequency Response | 100 Hz to 15 kHz | |
| RECEIVER | ||
| Receiving System | Dual independent RF sections, automatic-switching diversity | |
| Image Rejection | 55 dB nominal, 50 dB minimum | |
| Signal-to-noise Ratio | >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz | |
| Total Harmonic Distortion | <1% (10 kHz deviation at 1 kHz) | |
| Sensitivity | 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted) | |
| Intermediate Frequency | 65.75 MHz, 10.7 MHz | |
| Audio Output | Unbalanced; 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load), Balanced; 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load) | |
| Output Connectors | Unbalanced; 1/4" (6.3 mm) phone jack, Balanced; XLRM-type | |
| Power Supply | 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply | |
| Dimensions | 210.0 mm W x 44.0 mm H x 162.2 mm D | |
| Weight | 1.0 kg | |
| BODY-PACK TRANSMITTER | ||
| RF Power Output | 12 mW | |
| Spurious Emissions | Under federal regulations | |
| Input Connections | High impedance, low impedance, bias | |
| Batteries | Two 1.5V AA alkaline (not included) | |
| Current Consumption | 150 mA typical | |
| Battery Life | Approximately 9 hours (depending on battery type and use pattern) | |
| Dimensions | 66.0 mm W x 92.3 mm H x 22.5 mm D | |
| Net Weight | 80 g | |
See any errors on this page? Let us know.
