KV2 Audio VHD2.0 L 3-Way Passive Loudspeaker

• Professional Baltic birch construction with wear-resistant polymer coating.
• Four full length pieces of fly-track (two per side) and two five point, pull back
  pieces on the rear of the cabinet.
• Very High Definition audio reproduction.
• 139 dB sustained output, 142dB peak.
• Controlled wide dispersion 80° x 40° Mid / High horn.
• New state of the art 3” (76mm) Nitride Titanium diaphragm compression
  driver with complex geometry phase plug and neodymium magnetic structure for
  higher output, exceptionally low distortion and extended frequency response.
• Two 8” Trans-Coil midrange drivers, with a 3” (76mm) voice coil and neodymium
  magnet for increased control and output with reduced distortion and weight.
• Two horn loaded 12” mid-bass drivers with 3” (76mm) inside/outside, epoxy baked,
  high temperature voice coil assemblies and neodymium magnetic structures.
• Three way active requirement - 2000W from the VHD 2000 providing 1200W for
  the 12” Low Mids, 600W for the 8” Midranges and 200W for the High Frequency.
• Proprietary side and top handle design (six) for simplified handling and carrying.
• High impact low friction feet, allowing lock- in to the VHD subwoofers and
  easy cabinet movement.
• Front locking aluminium VHD wheel boards with wraparound hardwood bumpers.
• Weather proofing option and special paint finishes available on request.

80° x 40°
80° x 10° (two VHD 2.0's)