- The product HK Audio ICON/LTS Complete Sound System has been added to comparison list.

HK Audio ICON/LTS Complete Sound System

€18,977.18

Availability: Out of stock

Tell me when available

Description

Product Description

ICON LTS is a thoroughly modern, processor-controlled active stacking P.A. for use in festival tents, clubs and at open-air events requiring high Sound Pressure Levels.
For situations where line array systems may be overkill in terms of cost and complexity, this system presents itself as a perfect alternative, offering easier set up, less cabling, and simpler operation. At the same time, ICON LTS achieves a high level of operational reliability and sonic quality thanks to its internal electronics and high quality components.
ICON LTS combines the latest DSP technology, outstanding acoustic design and excellent headroom in a sound reinforcement system that sets new standards for efficiency with regard to performance and sound as well as operation and cost. These virtues recommend it especially well to rental firms, touring Top-40 bands or gala orchestras.

Product Features

IC 118 BA
18” bandpass subwoofer
10.000 Watts of ultra light weight class D amps
High SPL (136 dB max) and maximum headroom
BvNet - control and monitor status and system parameters conveniently from your PC
IC 112 LA
2” / 1,4” horn loaded coaxial design
Long throw performance with perfect 60° x 40° directivity
24-bit/96 kHz digital controller with >110 dB dynamic range
10.000 Watt Class D Power
BvNet - control and monitor status and system parameters conveniently from your PC
Frequency response (System): 33Hz-17 kHz (-10dB)

Specifications

Product Specification

ICON IC 112 LA
Connections		1x XLR Line In, 1x XLR Line Through, 1x XLR Sub Out, 2x BVNet RJ45 IN/OUT, 1x Ethernet RJ45 Internal System Guard
Input impedance		20 kOhm
Input sensitivity		+16 dBu, +4 dBu, 0 dBu, -10 dBu, variable
Max. Input level		+22 dBu
Frequency response +/- 3 dB		134 Hz – 17 kHz (LTS System Filter)
Frequency response +/- 10 dB		108 Hz – 17 kHz
Sensitivity 1W@1m¹		109 dB (120 Hz – 16 kHz)
Max SPL calculated¹		139 dB, based on peak power handling capacity
Max SPL peak¹		136 dB SPL @ 10% THD
Max SPL¹		131 dB SPL @ 10% THD, 120 Hz – 12 kHz; 134 dB SPL @ 10% THD, 120 Hz – 5 kHz
Amplifier Mid		1x 1000 W / Class D @ 4 Ohm
Amplifier Hi		1x 600 W / Class D @ 4 Ohm
Limiters		RMS Limiter, Peak Limiter, Subsonic Filter
MF Speaker		12" Neodymium
HF Speaker		1,4"
Directivity		60° x 40° CD horn
Crossover Frequency		900 Hz, 24 dB/ Oct.
Rigging points		Aeroquip
Handles		4, integrated
Grille		Metal Grille with black acoustic foam
Castors		Dolly with four 100 mm castors
Accessories		ICON Tilt-Unit, 5°, 10°, 15°, dust cover
Dimensions (WxHxD)		50 x 60 x 81 cm
Weight		49,9 kg/ 110 lbs. (without dolly)
ICON IC 118 BA
Connections		1x XLR Input, 1x XLR Through, 2x Ethernet RJ45 Internal System Guard
Input impedance		20 kOhm
Input Sensitivity		+4 dBu
Max. Input Level		+22 dBu
Frequency response +/- 3 dB		41 Hz- fx
Frequency response – 10 dB		33 Hz - fx
Sensitivity 1W@1m¹		105 dB
Max SPL calculated¹		138 dB, based on peak power handling capacity
Max SPL peak¹		138 dB SPL @ 10% THD, 90 Hz - 100 Hz
Max SPL¹		136 dB SPL @ 10% THD
Amplifier Sub		1x 2000 W / Class D @ 4 Ohm
Limiters		Subsonic Filter, System Controller with Peak Limiter
Woofer		18" Neodymium
Pole mount		Two M20 threaded base plates
Handles		8, integrated
Grille		Metal Grille with black acoustic foam
Castors		Dolly with four 100 mm castors
Accessories		Dust cover
Dimensions (WxHxD)		50 x 90 x 81 cm
Weight		54,1 / 119,2 lbs (without dolly)
GENERAL TECHNICAL DATA
Max. Power Consumption		1050 W (IC 112 LA), 1880 W (IC 118 BA)
Max. Current Consumption		4,5 A (IC 112 LA), 8,1 A (IC 118 BA)
Internal fuse		4 AT / 10 AT (IC 112 LA), 10 AT (IC 118 BA)
Mains voltage range		220 V - 240 V
Mains connector		Neutrik Powercon

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

See any errors on this page? Let us know.