Rocktron Velocity 300 Power Amplifier
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The Velocity 300 is a power amplifiers that has been specifically manufactured for guitar players since the early 1990’s. Featuring a unique “Reactance” circuit that actually replicates the output impedance of tube amplifiers—so you can get the same great sound that a tube amplifier delivers in a reliable solid state design. And, because it is a variable control, you can customize your Velocity 300 to sound like any of your favorite tube amps. Best of all, this feature is available also in mono bridged mode.
Product Features
- 115/230 VAC voltage selector switch
- Two 150w channels for stereo applications
- 300w channel in mono bridged mode into a 8ohm load
- Reactance circuit (replicates the output impedance of tube amplifiers)
- Definition controls to give you that little bit of edge you need to bring your playing out in the mix
- Automatic short circuit protection
- An AC power detect circuit (prevents damaging speakers with electrical thumps or pops)
- Differential input buffers (to eliminate ground loop hum coming from the power amplifier)
Specifications
Product Specification
| OUTPUT POWER | ||
| Unbridged | 150 watts per channel @ 4 ohms (both channel driven); 75 watts per channel @ 8 ohms (both channels driven); 37.5 watts per channel @ 16ohms (both channels driven) | |
| Bridged | 300 watts @ 8 ohms; 170 watts @ 16 ohms | |
| GENERAL | ||
| Input Sensitivity | -7.3dBu (0.335V RMS), 4W stereo for rated output at max. gain | |
| Maximum Input Level | 23dBu (10.95V RMS), input stage clip point | |
| Maximum Output Level | 35dBu (4W bridged) | |
| Maximum Gain | 36dB | |
| Noise Floor | -75dBu typical (referenced to 1 watt) | |
| Dynamic Range | 95dB | |
| Distortion (Typical) | 0.1% THD | |
| Frequency Response | 20Hz - 20KHz, +0/-3dB | |
| Current Consumption | 5 amps @115VAC max. (575 watts) | |
See any errors on this page? Let us know.
