Crest Audio CC4000 4000 Watts Power Amplifier
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The CC4400 like all CC Series amplifiers by Crest Audio is built with tunnel-cooled heat sinks, variable-speed DC fans and extensive protection circuitry for superior efficiency into difficult loads and power conditions. In the Crest Audio tradition, these robust amps also boast more power devices (16 per channel) than any competitive amplifier, plus a switched-rail class H output stage and triple-compound design to provide low distortion and excellent thermal stability. Based on powerful Pro 200. Series technology and utilizing a linear power supply, the CC4400 amp delivers stable high power output for running main systems, monitors and subwoofers.
Product Features
- 8-Ohm Stereo - 800 W
- 4-Ohm Stereo - 1350 W
- 2-Ohm Stereo - 2000 W
- 4-Ohm Bridged - 4000 W
- Toroidal power transformer
- Magnetic circuit breaker on/off switch
- Cooled by variable speed fan with back-to-front airflow
- Mode selector switch for stereo, parallel and bridged-mono operation
- Inputs: Balanced female XLR, 1/4" TRS combi jacks
- Outputs: Speakon(R) and five-way binding posts
- Recessed, stepped attenuators
- 16-gauge steel chassis, cast aluminum front panel
Specifications
Product Specification
| POWER | ||
| Rated Power Bridged 8 ohms | 4000 watts @ 1 kHz at <0.1% T.H.D. | |
| Rated Power (2 x 2 ohms) | 2000 watts per channel @ 1 kHz at <0.1% T.H.D. both channels | |
| Rated Power (2 x 4 ohms) | 1350 watts per channel @ 1 kHz at <0.05% T.H.D. both channels | |
| Rated Power (2 x 8 ohms) | 800 watts per channel @ 1 kHz at <0.05% T.H.D. both channels | |
| Rated Power (1 x 2 ohms) | 2550 watts @ 1 kHz at <0.1% T.H.D. | |
| Rated Power (1 x 4 ohms) | 1600 watts @ 1 kHz at <0.05% T.H.D. | |
| Rated Power (1 x 8 ohms) | 900 watts @ 1 kHz at <0.05% T.H.D. | |
| Minimum Load Impedance | 2 ohms | |
| Maximum RMS Voltage Swing | 93 volts | |
| INPUT SENSITIVITY & IMPEDANCE | ||
| Input Sensitivity (x40) | 1.88 volts +/- 3% for 1 kHz, 4 ohm rated power | |
| Input Impedance | 15 k ohms, balanced | |
| Input CMRR | >- 65 dB @ 1 kHz | |
| FREQUENCY | ||
| Response | 10 Hz - 100 kHz; +0, -2 dB at 1 watt | |
| Power Bandwidth | 10 Hz - 35 kHz; +0, -3 dB at rated 4-ohm power | |
| T.H.D. (2 x 2 ohms) | <0.2% @ 1475 watts per channel from 20 Hz to 20 kHz | |
| T.H.D. (2 x 4 ohms) | <0.1% @ 1150 watts per channel from 20 Hz to 20 kHz | |
| T.H.D. (2 x 8 ohms) | <0.1% @ 700 watts per channel from 20 Hz to 20 kHz | |
| GENERAL | ||
| Voltage Gain | x40 (32 dB); x20 (26 dB) | |
| Crosstalk | > -65 dB @ 1 kHz at rated power @ 8 ohms | |
| Hum and Noise | > -112 dB, “A” weighted reference to rated power @ 8 ohms | |
| Slew Rate | > 15V/us | |
| Damping Factor (8 ohms) | > 500:1 @ 20 Hz - 1 kHz | |
| Phase Response | +5 to - 15 degrees from 20 Hz to 20 kHz | |
See any errors on this page? Let us know.
