Audiophony WI-1200 Power Amplifier

Variant 9563.0:
• Power:
- Stereo RMS 8 Ohm: 2 x 400 W
- Stereo 4 Ohms RMS: 2 x 600 W
- Stereo RMS 2 Ohms: 2 x 900 W

- 8 Ohms Bridged Mono: 1 x 1200 W
- Mono 4 Ohms bridged: 1 x 1800 W

• S / N Ratio: 102 dB
• Distortion (SMPTE-IM): 0.01%
• Input Sensitivity @ 8 Ohms: 4 dBu
• Voltage Gain: 33 dB
• Type of amplification: AB

• Power consumption: AC230V - 50Hz
- To 1 / 8 power @ 4ohms: 3.5 A
- To 1 / 3 power @ 4ohms: 6 A
- At full power @ 4 Ohms: 9.5 A

• Distortion:
- Between 20Hz and 20KHz to 1 / 2 power: 0.01%
- A 1 KHz at full power: 0.1%

• Bandwidth: 20Hz-20KHz
• Damping factor at 400Hz:> 250
• Input Impedance Balanced / Unbalanced: 15 kOhm / 30 kOhm
• Level of clip: 22 dBu (10Vrms)
• Cooling: controlled ventilation from front to back

• Connectors:
- Input: Sheet Combo (XLR + TRS) balanced
- Output: screw terminals Speakon ® 4 + points

• Settings:
- Front: interuptor Power / Settings Level 1 and 2
- Back: HPF Switch / Limiter Switch / Mode Selector

• Indication: On (Blue) / Protect (Red) / Clip (Red) /-20dB (green) /-10dB (yellow)

• Protections:
- Against short circuits
- Current limiter
- Against the drift voltage
- Immunity to radio frequency

• Dimensions (W x H x D): 2U x 19 inches (482 x 88 x 420 mm)
• Weight: 19.2 Kg