KV2 Audio VHD2000 Power Amplifier for VHD2.0
Related Products
- Manufacturer Description
- Reviews
Manufacturer Description
Manufacturer Description
The VHD 2000 is the control and amplification unit for the VHD 2.0. It is a three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers. It also houses all processing and control electronics for the subwoofer system. Our own hybrid signal processing brings together the very best technology available from both the analogue and digital worlds to offer complete audio system control, equalization, overdrive protection, thermal protection and user adjustable set up parameters. Once the set-up process is completed, the VHD 2000 manages all system functions and assures optimal performance.
Manufacturer Features
|
Manufacturer Specification
| Signal Input | Â |
| Input Impedance | Switched from 10ké to 50é "Line driver ready" |
| Input Sensitivity | 1.0V rms |
| Outputs | Main Through output, sub A and B out |
| Insert Connectors | Mid High insert point, A and B Sub insert points |
| Â | |
| Power Connector | Â |
| Power Connector | Neutrik PowerConî |
| Â | |
| Product Description | Â |
| Product Description | A 2900W three channel 19â rack-mount controller / amplifier with individual 1600W, 1000W,< 00W amplifiers. Contains all control, limiting, crossovers, phase correction and system set up for the VHD 3200 subwoofer. State of the art DSD⢠6.0MHz digital delay line for driver alignment in VHD 2.0 / 1.0 |
| Â | |
| High Frequency Amplifier | Â |
| Amplifier Type | Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
| Rated Continuous Power | 300W |
| Distortion | <0.05% |
| Operating Bandwidth | 2.2kHz - 30kHz |
| Â | |
| Midrange Amplifier | Â |
| Amplifier Type | High Efficiency, high current mid frequency switching amplifier |
| Rated Continuous Power | 1000W |
| Distortion | <0.05% |
| Operating Bandwidth | 450Hz - 2.2kHz |
| Â | |
| Mid-Bass Amplifier | Â |
| Amplifier Type | High efficiency, high current low frequency switching amplifier |
| Rated Continuous Power | 1600W |
| Distortion | <0.05% |
| Operating Bandwidth | 100Hz - 450Hz |
| Â | |
| Physical Dimensions | Â |
| Height | 177.8mm (7.0") |
| Width | 483mm (19.0") |
| Depth | 495mm (19.5") |
| Weight | 30kg (66lbs) |
| Â | |
| Speaker Input /Output | Â |
| Speaker Input/ Output | One EP6 for VHD 2.0 / 1.0 |
| Â | |
| Recommended Amperage | Â |
| Recommended Amperage | 30A 115V | 16A 230V |
| Â | |
| System Set Up | Â |
| System Set up | Six position selector for a choice of VHD subwoofer combinations to feed a VHD 3200 including a five way setting for use with VHD 1.21 subwoofers. |
| Â | |
| Level Control | Â |
| Level Control | Main input level +/- 6dB |
| Â | |
| Subwoofer Level Control | Â |
| Subwoofer Level Control | Sub level A and B +/- 6dB |
| Â | |
| Two per Side switch | Â |
| Two per Side Switch | Switch for precise correction of phase and equalization when using two VHD 2.0âÂÂs and two VHD2000âÂÂs per side together |
| Â | |
| Full Range Mode | Â |
| Full Range Mode | Switch for running a VHD 2.0 in full range mode, down to 60Hz (Note: This setting mutes the subwoofer outputs) |
| Â | |
| Operating Voltage | Â |
| Operating Voltage | 100-120V @ 60Hz | 230-250V @ 50Hz |
| Â | |
See any errors on this page? Let us know.
