KV2 Audio EPAK2500 Amplifier w/Control for ES Series
Related Products
- Manufacturer Description
- Reviews
Manufacturer Description
Manufacturer Description
The EPAK 2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also controls the allocation of power depending on the number of bass modules employed. Unlike other active speaker systems, the EPAK 2500 allows placement of critical electronics remotely.
Manufacturer Features
|
Manufacturer Specification
| Signal Input | Â |
| Input Impedance | 20ké |
| Input Sensitivity | 1.0V rms |
| Line Output | Main Through ouput |
| Insert Connectors | Insert point for Sub In/ Out |
| Â | |
| Power Connector | Â |
| Power Connector | Neutrik PowerConî |
| Â | |
| Product Description | Â |
| Product Description | A 2500 watt four channel controller/amplifier pack with individual 1600W, 600W, 200W and 100W mono amplifiers. Free standing unit contains all control, limiting, crossovers, phase correction, time alignment and system set up. Removable lid acts as storage for speaker cables and mains lead. |
| Â | |
| High Frequency Amplifier | Â |
| Amplifier Type | Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
| Rated Continuous Power | 100W |
| Distortion | <0.05% |
| Operating Bandwidth | 2.5kHz - 28kHz |
| Â | |
| Midrange Amplifier | Â |
| Amplifier Type | Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
| Rated Continuous Power | 200W |
| Distortion | <0.05% |
| Operating Bandwidth | 500Hz - 2.5kHz |
| Â | |
| Mid-Bass Amplifier | Â |
| Amplifier Type | High efficiency, high current, low frequency switching amplifier |
| Rated Continuous Power | 600W |
| Distortion | <0.05% |
| Operating Bandwidth | 130Hz - 500Hz |
| Â | |
| Subwoofer Amplifier | Â |
| Amplifier Type | High efficiency, high current, low frequency switching amplifier |
| Rated Continuous Power | 1600W |
| Distortion | <0.05% |
| Operating Bandwidth | 20Hz - 130Hz |
| Â | |
| Physical Dimensions | Â |
| Height | 700mm (27.55") |
| Width | 450mm (17.71") |
| Depth | 290mm (11.41") |
| Weight | 32kg (70.4lbs) |
| Â | |
| Speaker Input /Output | Â |
| Speaker Outputs | One EP6 for ES 1.0 and one EP4 for ES series subwoofers |
| Â | |
| Recommended Amperage | Â |
| Recommended Amperage | 30A 115V | 16A 230V |
| Â | |
| System Set Up | Â |
| System Set up | Six position selector for a choice of ES subwoofer combinations |
| Â | |
| Level Control | Â |
| Level Control | Main input level +/- 6dB |
| Â | |
| Subwoofer Level Control | Â |
| Subwoofer Level Control | Internal Sub level +/- 6dB |
| Â | |
| Bass Management Switch | Â |
| Bass Management Switch | Attack or Extension switch for alternative Bass Character |
| Â | |
| Operating Voltage | Â |
| Operating Voltage | 100-120V @ 60Hz \ 230-250V @ 50Hz |
| Â | |
See any errors on this page? Let us know.
