Samson TXM-20 Tabletop Powered Mixer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The TXM20 is a 20 channel powered mixer, with selectable power amp mode settings for 500 watts of power per channel, or 1000 watts in bridged mono. It features 12 high-quality microphone preamps with phantom power; channel inserts and low cut filters. The TXM20 has 1/4-inch phone and Speakon® outputs. 3-band EQ pre channel, 4 Aux sends, and dual internal 24 bit effects processor with 100 preset programs. There is 1 stereo 9-band graphic EQ for the mains plus 1 mono 9-band graphic EQ for the monitors, and a mono sub output with variable low-pass filter. All of this plus a large metal carry handle make the TXM20 equally suited for gigging musicians or in fixed installations.
Product Features
- 12 high-quality microphone preamps
- 500 watts stereo, 1000 watts bridged mono
- 4 Aux sends (1 pre, 1 pre/post, 2 effects)
- Dual 9-band graphic EQ
- Internal 24 bit effects processor with 100 preset programs
- Mono sub output with variable low-pass filter
- 1/4-inch phone and Speakon® outputs
Specifications
Product Specification
| OUTPUT POWER | ||
| Rated | 2 X 500W at 4Ω @0.1% | |
| THD at 1KHz | 1 X 1000W at 8Ω Bridged | |
| FREQUENCY | ||
| Response | 20Hz~20KHz+/-0.7dB@1W | |
| Output into 8Ω | (AMP OUT) 20 Hz~20KHz+/-0.4@+4dB | |
| Output into 10kΩ | MAIN OUT, MAIN OUT 2, AUX OUT, AUX SEND, EFX OUT | |
| HARMONIC DISTORTION | ||
| Total | Less than 0.06% @ 20Hz~ 20KHz, 75W output into 4Ω (SPEAKER OUT); Less than 0.1%@20 Hz~20KHz+4dBu output into 10KΩ (MAIN OUT, MAIN OUT 2, AUX OUT, EFX OUT) | |
| HUM & NOISE | ||
| Equivalent input noise | -121dB | |
| Average, RS+150Ω | -100dB residual output noise (MAIN OUT, AUX OUT, EFX OUT) | |
| With 22Hz~22KHz BPF) | -79dB (MAIN OUT, AUX OUT) Master level control at maximum, all channel level control at minimum; -79dB (EFX OUT) Master level control at maximum, all channel level controls at minimum | |
| MAXIMUM VOLTAGE | ||
| Gain | 67dB CH IN (MIC) to AMP OUT; 63dB CH IN (MIC) to MAIN OUT, MONITOR OUT; 54dB CH IN (MIC) to AUX 2 OUT; 30dB CH IN (MIC) to REC OUT; 32dB CH IN (LINE) to MAIN OUT, MONITOR OUT; 26dB AUX IN to MAIN OUT; 24dB TAPE IN to MAIN OUT | |
| CROSSTALK | ||
| 1KHz | 70dB adjacent input, 70dB input to output | |
| INPUT CHANNEL EQUALIZATION | ||
| HIGH | 12KHz shelving (+/- 15dB MAX) | |
| MID | Variable 100 Hz to 8kHz peaking (+/- 15dB MAX) | |
| LOW | 80Hz shelving (+/- 15dB MAX) | |
| METERS | ||
| 11 POINT LED METERS | -20, -15, -10, -7, -5,-3, 0, +1, +2, +4, +6dB | |
| GRAPHIC EQUALIZER | ||
| 9 bands | 63, 125, 250, 500, 1K, 2K, 4K, 8K, 16KHz | |
| INTERNAL DSP EFFECTS | ||
| 24 BIT - 10 Presets each | 1-Performance; 2-Hall Reverb, 3-Plate Reverb; 4 –Spring Reverb; 5-Echo; 6-Flange + Verb; 7-Chorus + Verb; 8-Echo + Verb; 9-Chorus; 10-Flange | |
| POWER | ||
| Phantom | +48V | |
| Requirements | 110V/60 Hz, 240V/50Hz | |
| Consumption | 1900W, MAX | |
| CLIP INDICATORS | ||
| Turn on | THD> 0.1% | |
| FOOT SWITCH | ||
| Digital Effect Mute | ON/OFF | |
See any errors on this page? Let us know.
