- The product Samson MDR-6 6-Channel Mixer has been added to comparison list.

Samson MDR-6 6-Channel Mixer

€134.46

Availability: Out of stock

Tell me when available

Description

Product Description

The MDR6 is a six-channel mixer with four low noise microphone preamps. This conveniently compact tabletop mixer features HDM (Hard Disk Mode), which, when engaged, provides a special monitoring and busing mode ideal for interfacing with a computer based hard disk recorder. With clean, clear sound reproduction packaged in a rugged enclosure, the MDR6 ensures reliable high-quality sound from performance to performance. Optimized for recording, live sound reinforcement and commercial installations; the MDR6 is an ideal mixing solution offering big sound in a compact package.

Product Features

Six input stereo mixer
Low noise op-amps
Low impedance circuit design
60mm faders on each channel and mains
3-band EQ on each channel
Hard Disc record mode
Four XLR inputs with mic preamps
Mono out with level control
Dual 5-segment LEDs
Aux send with effects return
Headphone out with level control
Phantom power
In-line power supply

Specifications

Product Specification

FREQUENCY RESPONSE (TRIM @ MIN, UNITY GAIN +0/-1DB)
Mic to Main		10 Hz - 30 kHz
Line to Main		10 Hz - 30 kHz
Aux Return to Main		10 Hz - 30 kHz
Line to Aux Send		10 Hz - 32 kHz
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 Hz LPF)
Mic/Line to Main(Mono Ch)		0.02%
Line to Main (Stereo Ch)		0.02%
Line to Aux Send		0.02%
EQUIVALENT INPUT NOISE (“A” filter on, input shorted)
Mic		-128 dB
Line		-104 dB
MAXIMUM VOLTAGE GAIN
Mic to Main		74 dB
Line to Main (Mono Ch)		56 dB
Line/Tape to Main (Stereo Ch)		34 dB
Aux Return to Main		20 dB
Mic to Aux Send		74 dB
Line to Aux Send (Stereo Ch)		34 dB
RESIDUAL NOISE (30 kHz LPF, all control Min)
Main		-89 dBu
Aux Send		-86 dBu
CROSSTALK (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch		-75 dB
Input vs. Output		-87.5 dB
PEAK LED SENSITIVITY
Before clipping		5 dB
CLIP INDICATORS
Turn on		THD> 0.1%
HEADPHONE
Output (600 ohm load)		100 mW
MAXIMUM INPUT LEVEL (1 kHz, Ch. & Mix fader set to 0)
Mic Input (Mono Ch)		+11 dBu
Line Input (Stereo Ch)		+27 dBu
INPUT CHANNEL EQUALIZER (± 2dB)
High (shelving)		12 kHz ±15 dB
Mid (peaking)		2.5 kHz ± 15 dB
Low (shelving)		80 Hz ±15 dB
Meters
5 Point Led Meters		-20, -6, 0, +6dB and PEAK
POWER
Phantom		+48V
Requirement		110V-240V, 50/60Hz
Consumption		19 watts

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

See any errors on this page? Let us know.