Samson TXM-16 Tabletop Powered Mixer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The TXM16 is a 16 channel powered mixer, with selectable power amp mode settings for 500 watts of power per channel, or 1000 watts in bridged mono. It features 8 high-quality microphone preamps with phantom power; channel inserts and low cut filters. The TXM16 has 1/4-inch phone and Speakon® outputs. 3-band EQ pre channel, 3 Aux sends, and an internal 24-bit effects processor with 100 preset programs. There is 1 stereo 9-band graphic EQ for the mains plus 1 mono 9-band graphic EQ for the monitors, and a mono sub output with variable low-pass filter. A large metal grab handle and a rack mounting kit is included with the TXM16 making it perfectly suited for fixed installations.
Product Features
- 8 high-quality microphone preamps
- 500 watts stereo, 1000 watts bridged mono
- 3 Aux sends (2 pre, 1 effects)
- Dual 9-band graphic EQ
- Internal 24 bit effects processor with 100 preset programs
- Mono sub output with variable low-pass filter
- 1/4-inch phone and Speakon® outputs
Specifications
Product Specification
| RATED OUTPUT | ||
| Power | 2 X 500W at 4Ω @1% THD @ 1KHz, 1 X 1000W at 8Ω Bridged | |
| FREQUENCY | ||
| Response | 20Hz~20KHz+/-0.7dB@1W, Output into 8Ω (AMP OUT), 20 Hz~20KHz+/-0.4@+4dB, Output into 10kΩ (MAIN, OUT, MAIN OUT 2, AUX OUT, AUX SEND, EFX OUT) | |
| HARMONIC DISTORTION | ||
| Total | Less than 0.06% @ 20Hz~ 20KHz, 75W output into 4Ω (SPEAKER OUT); Less than 0.1%@20 Hz~20KHz+4dBu output into 10KΩ (MAIN OUT, MAIN OUT 2, AUX OUT, AUX SEND, EFX OUT) | |
| HUM & NOISE | ||
| Equivalent input noise | -126dB | |
| (Average, RS+150Ω) | -100dB residual output noise (MAIN OUT, AUX OUT, EFX OUT) | |
| (with 22Hz~22KHz BPF) | -73dB (MAIN OUT, AUX OUT) Master level control at maximum, all channel level control at minimum; -73dB (EFX OUT) Master level control at maximum, all channel level controls at minimum. | |
| MAXIMUM VOLTAGE | ||
| Gain | 67dB CH IN (MIC) to AMP OUT 74dB CH IN (MIC) to MAIN OUT, MONITOR OUT 70dB CH IN (MIC) to AUX 2 OUT 52.2dB CH IN (MIC) to REC OUT 54dB CH IN (LINE) to MAIN OUT, MONITOR OUT 12dB AUX IN to MAIN OUT 24dB TAPE IN to MAIN OUT | |
| CROSSTALK | ||
| 1KHz | 70dB adjacent input, 70dB input to output | |
| INPUT CHANNEL EQUALIZATION | ||
| HIGH | 12KHz shelving (+/- 12dB Maximum) Mono & ST CH | |
| MID | Variable 80Hz to 8kHz peaking (+/- 15dB Maximum) Mono CH 2.5kHz peaking (+/-12dB) Maximum ST CH | |
| LOW | 80Hz shelving (+/- 12dB Maximum) Mono & ST CH | |
| Meters | 11 POINT LED METERS (-20, -15, -10, -7, -5,-3, 0, +1, +2, +4, +6dB) | |
| EQUALIZER | ||
| Graphic | 9 bands (63,125, 250, 500,1K, 2K, 4K, 8K, 16KHz) +/-12dB | |
| INTERNAL DSP EFFECTS | ||
| 24 BIT - 10 Presets each | 1 - Performance; 2 - Hall Reverb, 3 - Plate Reverb; 4 – Spring Reverb; 5 - Echo; 6 - Flange + Verb; 7 - Chorus + Verb; 8 – Echo + Verb; 9- Chorus; 10- Flange | |
| PEAK INDICATORS | ||
| Turn on | 5dB before clipping | |
| FOOT SWITCH | ||
| Digital Effect Mute | ON/OFF | |
| POWER | ||
| Phantom | +48V | |
| Requirements | 120V/60 Hz, 240V/50Hz (Country Specific) | |
| Consumption | 500W, 1/8 Power | |
See any errors on this page? Let us know.
