Electro-Voice PLDK4+ 4-Piece Drum Microphone Package
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The Electro-Voice PL DK4 PLUS four piece Drum Microphone pre-pack was created specifically for a four-piece drum kit. The kit contains three PL35 tom/snare mics, with an integrated swivel, exceptional shape and design, and drum rim clamp; one PL33 kick drum mic, delivering total sound clarity while bringing you the punctuation and tight low end for kick drums and low frequency instruments; and one PL37 condenser overhead/hi-hat mic, crisply and cleanly capturing all the various musical tones of all percussions. Alone each mic does an excellent job, but as part of this package they deliver a sound quality that is out of this world, all equipped with a durable quality, firm-exterior, easy-to-carry nylon gig bag.
Product Features
- Three PL35 Snare Microphones
- One PL33 Kick Drum Microphone
- One PL37 Condenser Overhead/Hi-Hat Microphone
- Durable 600 Denier nylon gig bag for storage with a shoulder strap for added comfort and easy transport
Specifications
Product Specification
| PL33 SPECIFICATIONS | ||
| Element Type | Dynamic, Neodymium Magnet Structure | |
| Frequency Response | 20Hz-10,000Hz | |
| Polar Pattern | Supercardioid | |
| Sensitivity, Open Circuit Voltage, 1kHz | 0.63 mV/Pa (-64 dBV) | |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 | |
| Rated Impedance | 150 ohms | |
| Microphone Connector | 3-pin, XLR type | |
| Finish | Textured black satin body with Memraflex grille | |
| Dimensions (Length x Width x Shank) | 5.57" x 2.33" x 1.01" | |
| Net Weight | 12.9 oz | |
| PL35 SPECIFICATIONS | ||
| Element Type | Dynamic, Neodymium Magnet Structure | |
| Frequency Response | 50Hz-16,000Hz | |
| Polar Pattern | Supercardioid | |
| Sensitivity, Open Circuit Voltage, 1kHz | 2.2 mV/Pa (-53 dBV) | |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 | |
| Rated Impedance | 600 ohms | |
| Microphone Connector | 3-pin, XLR-type | |
| Finish | Textured black satin body with Memraflex grille | |
| Dimensions (Length x Width x Shank) | 4.25" x 1.69" x 3.20" | |
| Accessories Included | Stand adapter with Euro-thread insert, Drum rim clamp DRC-1, Soft zippered gig bag | |
| Net Weight | 8.3 oz | |
| PL37 SPECIFICATIONS | ||
| Element Type | Self-biased Condenser | |
| Frequency Response | 50Hz-16kHz | |
| Polar Pattern | Cardioid | |
| Sensitivity, Open Circuit Voltage, 1kHz | 6.0 mV/Pa (-45dBV) | |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 | |
| Rated Impedance | 200 ohms | |
| Max SPL (1% THD @ 1kHz) | 132 dB SPL | |
| Self Noise | 25 dB SPL, A-weighted | |
| Dynamic Range | 107 dB | |
| Signal-to-Noise Ratio | 69dB (@94 dB SPL) | |
| Power Requirements | Phantom Supply Requirement: 11 to 52 VDC, 4 mA | |
| Microphone Connector | 3-pin XLR-type | |
| Finish | Textured black satin body with Memraflex grille | |
| Dimensions (Length x Width x Shank) | 6.4" x 1.14" x 0.83" | |
| Accessories Included | Stand adapter with Euro-thread insert, Soft zippered gig bag | |
See any errors on this page? Let us know.
