Klark-Teknik DN370 Graphic Equalizer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The all-new Klark Teknik’s DN370 is the latest evolutionary step in a process of design refinement that goes back over 30 years. With DN370 they’ve started from the ground up and produced a unit that is totally without compromise, and also perfectly complements the existing Klark Teknik range of equalizers, both analogue and digital.
Specifications
Product Specification
| INPUTS TWO | ||
| Type | Electronically balanced (pin 2 hot) | |
| Impedance (Ω) | 20k | |
| Maximum input level | +22dBu | |
| OUTPUTS TWO | ||
| Type | Electronically balanced (pin 2 hot) | |
| Minimum load impedance | 600 Ω | |
| Source impedance | <60 Ω | |
| Maximum output level | +22dBu into >2kΩ | |
| PERFORMANCE | ||
| Frequency response relative to signal at 1kHz | ±0.5 dBu 20Hz-20kHz | |
| EQ out | ±0.5 dBu | |
| EQ in (flat) | ±0.5 dBu | |
| Distortion (THD+N) | < 0.003% @ 1kHz +4 dBu | |
| Dynamic range | >114dB (20Hz-20kHz unweighted, ±12dB range) | |
| Overload indicator | +20 dBu | |
| Gain | - ∞ to +6dBu | |
| Equalization | 30 Bands | |
| Centre Frequencies | To BS EN ISO 266:1997 25Hz-20kHz, 1/3 octave tolerance ±5% | |
| Maximum Boost/Cut | ±12dB, ±6dB | |
| High Pass Filter Slope | 12 dB/octave | |
| Low Pass Filter Slope | 12 dB/octave | |
| Notch filter attenuation | >17dB | |
| TERMINATIONS | ||
| Audio | 3-pin XLR and 6-pin Phoenix | |
| Power | 3-pin IEC | |
| POWER REQUIREMENTS | ||
| Voltage | 100V-240V a.c. | |
| Consumption | <60W | |
| DIMENSIONS | ||
| Height | 133mm (3U High) | |
| Width | 482mm | |
| Depth | 205mm | |
See any errors on this page? Let us know.
