- The product Samson S-COM+ Stereo Compressor Limiter has been added to comparison list.

Samson S-COM+ Stereo Compressor Limiter

Description

Product Description

The Samson S-Com plus is a one rack space, dual channel dynamics processor optimized for recording, live sound reinforcement systems, DJ set-ups and commercial installations. The S-Com plus is a complete dynamics processing solution offering two channels of full function Compressor, Expander/Gate, Limiter and De-Esser. S-Com plus’s convenient meters provide instant status of important gain management settings.

Product Features

Compressor/Limiter, Expander/Gate, De-Esser with Peak Limiter
Expander/Gate with Variable Trigger Control and Switchable Fast/Slow Release
Peak Limiter with Independent Threshold Control and Peak LED
Adjustable De-Esser with independent LED Meter for Reducing Sibilance
Advanced Circuit Design Utilizing Low Noise Operational
Amplifiers and High Quality VCA's
Servo Balanced Inputs and Outputs on XLR and 1/4" Connectors
SKD (Smart Knee Detector) Circuit Switches from Soft to Hard Knee Based on the Level of Input Signal Applied
AEG (Auto Envelope Generator) Mode Constantly Adjusts the Compressors Attack and Release Times

Specifications

Product Specification

SYSTEM SPECIFICATIONS
Frequency Response		<10Hz to 20kHz +0 / -0.1 dB effect out, -0.4 @ 100kHz, <10Hz to 20kHz +0 / -0.1 dB effect in, -3dB @ >100kHz
Dynamic range		116 dB, un-weighted, 22 Hz to 22 kHz
THD		0.008 % typ. @ +4 dBu, 1 kHz Effect out, 0.016% effect in
Crosstalk		>100dB, 22 Hz to 22 kHz
Operating Level		Selectable +4dBu / -10 dBV
Max. Input Level		+21dBu, balanced
CMRR		Min. 40dB, >50dB @ 1kHz
Max. Output Level		+21dBu, balanced
SIGNAL INPUT
Connectors		XLR and 1/4" TRS jack
Impedance		>20K Ohms balanced or >10K unbalanced
SIGNAL OUTPUT
Connectors		XLR and 1/4" TRS jack
Impedance		60 Ohms balanced or 30 unbalanced
KEY INPUT
Connector		1/4" jack
Impedance		10 k Ohm
Max. Input Level		+21 dBu
KEY OUTPUT
Connector		1/4" jack
Impedance		47 Ohms
Max. Output Level		+21 dBu
EXPANDER/GATE
Trigger range		Variable (Off to +10 dB)
Attack		<1 ms per 50 dB
Release		Variable (Slow: 100 ms / 1dB, Fast: 100 ms / 100 dB)
Ratio		Expander 2:1, Gate 16:1
COMPRESSOR SECTION
Detector		RMS
Threshold		-40 dB to +20 dB
Ratio		Variable (1:1 to infinity: 1)
Manual Attack Time		Variable (0.3 ms / 20 dB to 300 ms / 20dB)
Manual Release Time		Variable (0.05 to 5 Sec)
Output gain		Variable (-20 to +20 dB)
PEAK LIMITER SECTION
Threshold		Variable 0dB to Off
Ratio		Preset
Limiter		Ceiling type
Attack		<5 ms
Release		Typ. 20dB/s
DE-ESSER
Level range		Variable (0 to 10dB)
Maximum		12dB Gain Reduction mid / high band
FUNCTION SWITCHES
Gate		Gate or Expander
Release		Fast/slow
Enhancer		In/Out
In/Out (1,2)		Bypass
Key		Switches the detector section to external key input
Auto		Sets automatic attack and release times – program dependent
I/O Meter		Switches the Input/Output meter to read input or output level
In/Out		De-Esser
Stereo Link		Links both channels for stereo operation. Channel 1 becomes Master
Level (Rear Panel)		Changes the internal reference level from +4dBu to -10dBV
METERS & LED's
Gain Reduction		12-segment LED display: 30 / 27 / 24 / 21 / 18 / 15 / 12 / 9 / 6 / 4 / 2 / 1dB
Input/Output level		12 segment LED display: -30 / -24 / -18 / -12 / -6 / -3 / 0 / +3 / +6 / +9 / +12 / +18dB
Expander/Gate Threshold		2 LED'S Gate open, Gate closed
Peak Limiter Threshold		1 LED for Indication of Limiter function
Function switch		LED indicator in each (except Level switch)
POWER SUPPLY
Mains Voltages USA/Canada		105 - 125 VAC ~, 60 Hz
Mains Voltages Europe		215 - 254 VAC~, 50 / 60Hz
Power Consumption		10 Watts
Power inlet		Standard IEC receptacle/with fuse

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

See any errors on this page? Let us know.