Klark-Teknik Square ONE Graphic 30-Band Equalizer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The Square ONE graphic represents 30-years of Klark Teknik's design expertise, bringing superb audio performance within reach of the most budget-sensitive applications.
The Square ONE graphic's LPF is fixed at 12kHz. This is optimal for stage monitoring applications, both loudspeaker and IEM systems, and will increase available headroom as well as providing HF drivers with some thermal protection against ultrasonic frequencies.
Product Features
- 45mm faders with integral dust guards
- Signal present & Clip LEDs
- Universal Power Supply
- Fully balanced inputs & Outputs
- Relay activated bypass
- Roadworthy 3U steel chassis
- PROportional Q filters
- High Pass Filters
- Low Pass Filters
Specifications
Product Specification
| INPUT | ||
| Type | Electronically balanced (pin 2 hot) | |
| Impedance (Ω) | 20k | |
| OUTPUT | ||
| Type | Electronically balanced (pin 2 hot) | |
| Minimum load impedance | 600 Ω | |
| Source impedance | <60 Ω | |
| Maximum level | +22dBu into >2kΩ | |
| PERFORMANCE | ||
| Frequency response | EQ out ±0.5 dBu; EQ in (flat) ±0.5 dBu | |
| Distortion (THD+N) | < 0.005% @ 1kHz, +4 dBu | |
| Noise Floor | <-90 dBu | |
| Overload indicator | +19 dBu | |
| Gain | - ∞ to +6dBu | |
| Equalization | Bands 30 | |
| Centre Frequencies | To BS EN ISO 266:1997; 25Hz-20kHz, 1/3 octave | |
| Tolerance | ±5% | |
| Maximum Boost/Cut | ±12dB | |
| High Pass Filter Slope | 12 dB/octave | |
| Low Pass Filter Slope | 12 dB/octave | |
| POWER REQUIREMENT | ||
| Voltage | 100V-240V a.c. ± 10% | |
| Consumption | <25W | |
See any errors on this page? Let us know.
