Numark CDMIX1 Dual CD Performance System
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
CDMIX 1 is a dual-deck CD player and mixer, all together in one equipment. It’s perfect for mobile DJs because it’s portable and its concept eliminates the need for setting everything up, because it’s already done. CDMIX 1’s player is nearly based on CDN22 CDplayer, which is regarded for its quality and versatility. Its metal chassis gives it a huge resistance and reliability, for performing with it for years.
CDMIX 1’s CD players can run both CD and CD-R and can play either 3" or 5" disks. It features a pitch/jog wheel that allows setting cue points as well as adjusting tempo. It lets track sequence to be programmed. It can playback single and continuously. CDMIX1 has a large backlit LCD display. It also features a time button to switch display time between elapsed track time and remaining time both of track and CD. It can control pitch up to ±12% and has BPM counter. Its CD player features also dead space elimination and crosfader autostart player capability, which automatically starts cued-up playback.
CDMIX 1’s two channel mixer has features that standalone mixers can’t easily overcome. It has two Line/Phono external inputs that can be selected by a switch for plugging different equipment to it, like; turntables, cassette and reel-to-reel tape decks, HiFi VCRs, DAT machines, CD players, laser discs, tuners, synthesizers or even other mixing consoles. It also has a microphone input (with gain control), a direct input that allows connecting onboard CD units As for outputs it provides master balanced/unbalanced, record, 1/4" and 1/8" headphone - three band equalizer for master output. CDMIX 1 features also a crossfader and fader start button. It was designed to be played anywhere, so you can either use wall power or use another source which can be even a car battery to be connected through its 12VDC power input.
Product Features
- Dual-CD player and mixer single compact unit
- Fast setup and pack up
- Second system backup
- Rugged metal chassis housing
- Multifunction jog/shuttle wheels
- Programmable playback with cue points for CD and CD-R
- Automatic Fader Start playback
- Two-channel mixer with mic channel, replaceable crossfader, and PFL cueing
- RCA inputs for additional CD players, iPods, or turntables with preamps
- Stereo and mono outputs
- 1/4” and 1/8” outputs for stereo headphones
- Three-band EQ and stereo, tri-color LED metering
- Master outputs on both XLRs and RCAs
- Output for recording
- Wall power, 12VDC power supply or car battery
Specifications
Product Specification
| CD PLAYERS | ||
| Quantization | 16-bit linear/channel, 3 beam laser | |
| Oversampling rate | 8 times | |
| Short access time (Play next track) | less than 1.7sec | |
| Long access time (Track 1 ->Track 20) | less than 3sec | |
| Start Time | less than 0.3 sec | |
| Pitch control range | +/-12% | |
| Pitch bend | +/-16% | |
| INPUT LEVEL/IMPEDANCE | ||
| Line | -11dBV (280mV)/47K OHM | |
| Phono | -50dBV (3mV)/47K OHM | |
| Mic | -62dBV (0.8mV)/3K OHM | |
| OUTPUT LEVEL/IMPEDANCE | ||
| Rec OUT (RCA) | -15.5dBV (170mV) /1K OHM; 5V | |
| Master OUT (RCA) | 0dBV (1V) /1K OHM; +14dBV (5V) | |
| Master OUT (XLR) | 3.7dBm (1.2V) /470 OHM; +14dBV (5V) | |
| Phones (32 OHM) | -18dBV(0.13V) /33 OHM; 1V (30mW) | |
| (Note | 0dBV=1Vrms, 0dBm=0.775Vrms) | |
| FREQUENCY RESPONSE | ||
| CD | 20-20KHz; +1,-2dB | |
| Line | 20-20KHz; +1,-1.5dB | |
| Phono | 20-20KHz; +2,-2.5dB/RIAA | |
| Mic | 33-15KHz; +1,/-3dB | |
| SN RATIO: (IEC-A WEIGHTED) | ||
| CD/Line | more than 85dB | |
| Phono | more than 75dB | |
| Mic | more than 70dB | |
| TOTAL HARMONIC DISTORTION | ||
| CD/Line | less than 0.05%( 20KHz LPF) | |
| Phono | less than 0.12% | |
| Mic | less than 0.12% | |
| Phones (32 0HM) | less than 0.25% | |
| CROSSTALK | ||
| CD | more than 60 dB AT 1KHz | |
| Line/Phono | more than 55 dB AT 1KHz | |
| EQUALIZER | ||
| Low | +/- 12 dB (100Hz) | |
| Mid | +/- 12 dB (1KHz) | |
| High | +/- 11.5 dB (10KHz) | |
| POWER | ||
| Requirement | DC 12V, 2.5A | |
