Numark C3 Five-Channel Rack Mixer
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
NUMARK C3 is a mixer featuring five channels and an input for a DJ microphone. It’s a very versatile mixer that allows you to connect it to turntables, samplers, CD players and many other devices. As for inputs, it has 10 line, three mic and three phono and for outputs, Master, Record, and Zone. It features PFL gain-adjust with meter, split/blend cueing, panning on master fader, fader start, a replaceable assignable crossfader, three-band EQ on every channel and EQ on mic channel.
Product Features
- Five-channel rack DJ mixer
- Three 1/4" mic, three phono and10 line RCA as for inputs
- Master, Record and Zone RCA, Balanced XLR and 1/4" stereo Headphone
- Each channel with steep three-band EQ
- Mic channel with EQ
- Assignable, replaceable crossfader
- Fader start
- Split/blend cueing
- PFL gain-adjust
Specifications
Product Specification
| INPUTS | ||
| Line | 10KΩ input impedance; 77mV rms sensitivity for 1.22V output | |
| Mic | 600Ω input impedance unbalanced; 1mV rms sensitivity for 1.22V output; 70mV rms max input | |
| Phono | 47KΩ input impedance; 1.2mV rms sensitivity @1kHz for 1.22V output | |
| OUTPUTS | ||
| Line | 9V rms max | |
| Headphone | 0.5W into 47 ohm | |
| DISTORTION | ||
| THD | less than 0.01% | |
| SIGNAL-TO-NOISE RATIO | ||
| Line | > 98dB | |
| Mic | > 86dB | |
| Phono | > 81dB | |
| FREQUENCY RESPONSE | ||
| Line | 20Hz – 20kHz (±0.5dB) | |
| Mic | 20Hz – 15khz (±0.5dB) | |
| Phono | ±1dB (except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback) | |
| CHANNEL EQUALIZER | ||
| Bass | +12/-32dB @ 60Hz | |
| Middle | +12/-32dB @ 1.2kHz | |
| Treble | +10/-28dB @ 15kHz | |
| DJ MIC EQUALIZER | ||
| Bass | ±10dB @100Hz | |
| Treble | ±10dB @15kHz | |
| POWER CONSUMPTION | ||
| Typical | 11W | |
| With full headphone input | 14.7W | |
See any errors on this page? Let us know.
