Audix FP7 Fusion Drum Mic Package - 7 Piece
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The FP7 of the Fusion Series packs contains a combination of f2, f5, and f6 dynamic microphones and f9 condenser microphones.. The f5 is tuned for snare drum and can also be used for bongos, timbales, guitar cabs, and general purpose acoustic instruments; the f2 is suited for rack toms, floor tom, congas, djembe, bongos and timbales, bass cabs, and brass; the f6, with its extended bass response, is designed for kick drum, cajon, and other low frequency instruments. Six DCLIP mic clips and one MC1 mic clip are also included in the ragged aluminum road case.
Built to withstand the rigors of live stage applications, the Fusion series mics are also excellent for recording a wide variety of drums, percussion, and acoustic instruments.
Product Features
- All-in-one solution for drum miking
- Instrument-specific mics for optimal results
- Cost-effective
- Rugged Audix quality
- Aluminum carrying case
Specifications
Product Specification
| F2 | ||
| Application | Rack toms, floor tom, congas, djembe, bongos and timbales, bass cabs, and brass | |
| Features | Tailored frequency response, upper mid-range attack and clarity Transducer Type: Dynamic | |
| Frequency Response | 52 Hz - 15 kHz | |
| Polar Pattern | Hypercardioid | |
| Output Impedance | 580 ohms | |
| Sensitivity | 2 mV / Pa @ 1k | |
| Maximum SPL | ≥139 dB | |
| Off-axis rejection | >20 dB | |
| Power Requirements | None | |
| Housing / Finish | Cast Zinc Alloy / Black Coat | |
| Weight | 247 g / 8.7 ounces | |
| F5 | ||
| Application | Snare drum, bongos, timbales, guitar cabs, and general-purpose acoustic instruments | |
| Features | Tailored frequency response, upper mid-range attack and clarity Transducer Type: Dynamic | |
| Frequency Response | 55 Hz - 15 kHz | |
| Polar Pattern | Hypercardioid | |
| Output Impedance | 580 ohms | |
| Sensitivity | 2.2 mV / Pa @ 1k | |
| Maximum SPL | ≥137 dB | |
| Off-axis rejection | >20 dB | |
| Power Requirements | None | |
| Housing / Finish | Cast Zinc Alloy / Black Coat | |
| Weight | 283 g / 10 ounces | |
| F6 | ||
| Application | Kick drum, cajon, and other low frequency instruments | |
| Features | Tailored frequency response, low-end punch and mid-range clarity | |
| Transducer Type | Dynamic | |
| Frequency Response | 40 Hz - 16 kHz | |
| Polar Pattern | Hypercardioid | |
| Output Impedance | 580 ohms | |
| Sensitivity | 0.6 mV / Pa @ 1k | |
| Maximum SPL | ≥140 dB | |
| Off-axis rejection | >23 dB | |
| Power Requirements | None | |
| Housing / Finish | Cast Zinc Alloy / Black Coat | |
| Weight | 311 g / 11 ounces | |
| F9 | ||
| Application | Cymbals, overheads, high hat, goodie table, audience mic | |
| Features | Multi-purpose instrument microphone, captures high frequencies, easy to position, roadworthy construction | |
| Transducer Type | Pre-polarized condenser | |
| Frequency Response | 40 Hz - 20 kHz | |
| Polar Pattern | Cardioid | |
| Output Impedance | 200 ohms | |
| Sensitivity | 8 mV / Pa @ 1k | |
| Maximum SPL | ≥137 dB | |
| Off-axis rejection | >24 dB | |
| Power Requirements | None | |
| Housing / Finish | Cast Zinc Alloy / Black Coat | |
| Weight | 111 g / 4.37 ounces | |
See any errors on this page? Let us know.
