Audio-Technica M3 Wireless In-Ear Monitor System
Related Products
- Description
- Specifications
- Reviews
Description
Product Description
The advanced M3 IEM system presents an extended range of professional in-ear monitoring characteristics with a selection of 1321 channels and LCD displays on the transmitter and the receiver for preference settings. The stereo monitor system fits the Audio-Technica's flexible Personal Mix Control that admits both volume and mix control of two separate signals on stage, through the controls on the M3R body-pack receiver. Up to 16 complete M3 systems are able to be used at the same time while any number of M3R receivers may operate on the same frequency with just one M3T transmitter. Users may connect line-level inputs through the two XRL 1/4" combo input connectors in the M3T Stereo Transmitter. A headphone output permits you to directly monitor transmitter input signals.
Product Features
- High-fidelity clean sound
- 1321 UHF channels (automatic frequency scanning)
- Personal Mix, mono and stereo receiver modes
- LCD information display
- XLR loop output for signal connection to the mixing console and additional IEM system or recording equipment without signal degradation
- Adjustable squelch
- Protection with pilot tone against RF interferences when transmitter is switched off
- Multi-level limiter helps hearing protection from abrupt peaks
- Dynamic drivers for full frequency response and superb isolation
- 3 size rubber ear tips and ear-shaping foam tips
- Auxiliary input connection for ambience microphone, click-track, another microphone or line-level input
Specifications
Product Specification
| INPUT | ||
| Aux connector | 3.5 mm TRS stereo phone jack | |
| Body-pack Connections | XLRF-type/6.3 mm stereo (1/4") combination connector, Pin 1 and Sleeve: Ground, Pin 2 and Tip: Hot, Pin 3 and Ring: Cold | |
| Maximum level | XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu, 6.3 mm (1/4") mono, unbalanced: +26 dBu | |
| OUTPUT | ||
| Receiver Connectors | 6.3 mm (1/4") TRS stereo phone jack | |
| Loop transmitter connector | XLRM-type connector Pin 1: Ground ,Pin 2: Hot ,Pin 3: Cold | |
| POWER | ||
| Transmitter requirement | 12-18V DC, 600 mA | |
| Transmitter RF | 10 mW/50 mW (switchable), 50 ohms, Limited to 10 mW within 863 MHz to 865 MHz | |
| FREQUENCY | ||
| Overall Operating | Band E: 790.000 to 822.000 MHz, 1281 frequencies, Band F: 832.000 to 865.000 MHz, 1282 frequencies, Band L: 575.000 to 608.000 MHz, 1321 frequencies, Band M: 614.000 to 647.000 MHz, 1321 frequencies | |
| Response | 60 Hz to 13 kHz (+/- 3 dB) | |
| Minimum overall frequency | 25 kHz | |
| BATTERY | ||
| Receiver | 2 x 1.5V AA (not included) | |
| Life | 8 hours (alkaline) | |
| SYSTEM PERFORMANCE | ||
| Overall Maximum Deviation | ±40 kHz | |
| Overall Operating Range | 100 m (300'), typical | |
| Overall dynamic Range | 90 dB (typical), A-weighted | |
| Receiver RF sensitivity | 20 dBuV (at 60 dB S/N ratio, 50 ohms termination) | |
| Overall total harmonic distortion | <1% at (1 kHz, ±20 kHz Deviation) | |
| DIMENSIONS | ||
| Receiver | 70.0 mm W x 25.0 mm D x 110.0 mm H | |
| Transmitter | 210.0 mm W x 132.0 mm D x 44.0 mm H | |
| WEIGHT | ||
| Receiver | 133g | |
| Transmitter | 930g | |
